Oregon Oversize Permits Phone Number – (972)220-9831 (DOT Trucks)
We are a permit service provider. You can contact with us for getting permits in an affordable cost at unique trucking or Oregon Oversize Permits DOT phone number 972-220-9831. Our company Unique trucking is a name of honesty and trustworthy. Let’s connect with us.
Oregon oversize permits are important for motor carriers to safely transport large loads within the state.The Oregon Department of Transportation oversees the issuance of these permits, ensuring that carriers comply with specific requirements and conditions to prevent mishaps during transportation.
Oregon Oversize Permits DOT Phone Number - (972) 220-9831
Oregon Oversize Permits Cost:
Oregon Oversize Permit Fee |
|
Single Trip and Continuous Trip Permits |
$ 8.00 each, plus any applicable county or road use assessment fees. |
Oregon Oversize / Overweight Regulations:
Oregon oversize and overweight requirements include the following regulations and limits:
Oregon Oversize Permit Validity:
Oregon oversize permits are typically valid for 10 days and must be obtained before entering the state.
Oregon Oversize Permits Legal Dimensions:
Legal Dimensions of Oregon Oversize Permits |
|
Length |
53 Feet |
Width |
8 feet 6 inches |
Height |
14 feet |
Overhang |
4 Feet front 5 Feet rear |
Weight |
80,000 gross weight lbs. |
Oregon Pilot Cars / Escort Vehicle Requirements:
Escort Vehicle Requirements of Oregon Oversize Permit |
|
Numerous two-lane routes on the interstate in areas nearer Portland: |
|
Length |
Over 120′ – 1 escort, over 140′ – as required on the permit |
Width |
Over 14′ – 1 escort, over 16′ – as required on the permit |
Height |
More than 14 feet 6 inches – 1 escort |
For green Routes: |
|
Length |
Over 105′ – 1 pilot car/ truck escort, over 120′ – 2 pilot car/truck escorts, and over 140′ are on a case-by-case basis. |
Width |
Over 12′ – 1 escort, over 14′ – 2 escorts, over 16′ – as required on the permit. |
Height |
Over 14’6” – 1 pilot car/truck escort. |
For other 2-lane routes: |
|
Length |
Over 9′ – 1 pilot car/truck escort. |
Width |
Over 14’6” – 1 escort |
Height |
Over 95′ – 1 escort, over 120′ – 2 escorts, and over 140′ are on a case-by-case basis. |
Oregon Oversize Permits Operating Time:
Oregon Oversize permits operating time varies depending on the season. From Labor Day to Memorial Day, oversize and overweight transport is permitted from one-half hour before sunrise to one-half hour after sunset, seven days a week. During Memorial Day to Labor Day, Saturday travel is allowed until noon, and there is no travel permitted on Sundays for loads exceeding 14 feet wide.
However, loads not exceeding 14 feet wide can travel on weekends during daytime hours, and loads up to 10 feet wide can travel on “green” routes, while loads up to 12 feet wide on Interstates are allowed to travel at night.
Oregon Oversize Permits Time Restrictions:
Oregon oversize permits are valid for 10 days, and the operating time for these permits is from one-half hour before sunrise to one-half hour after sunset seven days a week from Labor Day to Memorial Day.
From Memorial Day to Labor Day, Saturday travel is allowed only until noon, with no travel on Sundays, except for loads not exceeding 14 feet wide, which can travel during weekend daytime hours only on Interstate highways west of the summit of the Cascade Mountains and on authorized highways east of the summit of the Cascade Mountains.
Oregon Oversize Signs, Lights, Flags Regulations
Oregon oversize signs, lights, and flags regulations require specific markings for over width loads during daylight hours. Red flags not less than 18 inches square must mark the outermost extremities of the load. Additionally, end load lights are necessary for visibility when conditions reduce visibility to less than 500 feet due to darkness or other factors.
When traveling at night with a wide load, lamps or marker lights must illuminate the outermost extremities. Amber warning lights are required when width exceeds certain limits on highways. These regulations aim to ensure safety and visibility for oversized loads in Oregon.
Oregon Oversize Tire Regulations:
Oregon oversize permits have specific regulations regarding tires. When checking tire pressure, a tire gauge should be used to measure inflation pressure in PSI. Tread depth is crucial for traction, especially in adverse weather conditions, with a minimum tread depth requirement of 2/32nds of an inch. Tire chains are mandatory in snowy or icy conditions when SNOW ZONE signs are posted.
Additionally, amber warning lights are required when the width exceeds 10 feet on a two-lane highway or 12 feet on a multi-lane highway, unless operating with a minimum of two pilot cars.
Oregon Oversize Permits Fines And Penalties:
Oregon oversize permits are subject to fines and penalties for non-compliance. Failure to comply with the regulations can result in civil and/or criminal sanctions, including citations issued at weigh stations or roadside checks. Violations can lead to penalties and fines, with specific details on the fines and penalties outlined in the Oregon Vehicle Code.
The fines and penalties for Oregon oversize permits are designed to ensure adherence to the state’s regulations on vehicle limits, weight, and size, emphasizing the importance of compliance with the law to maintain safety and efficiency on the roads.
Oregon oversize permits Axle Weight Limits:
Oregon Oversize Permits Axle Weight Limit |
|
Single Axle |
20,000 lbs. |
Tandem Axle |
34,000 lbs. |
Tridem Axle |
48,000 lbs. |
Oregon Oversize Annual Permits | Oversize Overweight Load Annual Permits
To legally transport oversize and overweight loads in Oregon, individuals must obtain an Oregon Oversize Annual Permit. This permit allows vehicles to exceed legal dimensions, including length, width, and height. The cost of the permit varies based on the routes chosen, whether limited to highways and freeways managed by ODOT or broader access.
Additionally, the permit regulations specify maximum dimensions allowed with the permit, such as a maximum length of 105 feet and a maximum width of 16 feet. Operating hours for oversize loads in Oregon are from half an hour before sunrise to half an hour after sunset.